MONITOR AUDIO GOLD GXW15 SPEAKERS
POA
FREE DELIVERY* T&C'S APPLY WITHIN NEW ZEALAND
The GXW-15 is a brilliant example of state-of-the-art subwoofer design. In a gloriously glossy, rigid compact enclosure, we’ve installed an ultra-long throw 15” C-CAM bass driver, triple suspended for a full 38mm (1.5”) of linear excursion. Featuring a massive magnet structure, and under the DSP control of a 650W D2Audio®* DSP controlled amplifier, this extraordinary deep bass generator brings a new dimension to bass, and reference results for SPL, dynamic control and headroom. It may deliver taut gut-churning bass all the way down to a seismic 18Hz, but the GXW-15 is also an intelligent design, featuring an advanced automatic room correction system called LEO™* (Listening Environment Optimizer). LEO simply and automatically eliminates the detrimental bass boost of boundaries and corners through the use of a microphone and test tones. The GXW-15’s sealed enclosure and front firing driver make it easy to install. Calibration from the front-mounted controls and dimmable LED display is simple, even from a distant position. It’s equipped with a 12V trigger and remote control with four user EQ pre-sets.
- Ultra long throw 15” C-CAM® driver featuring triple suspension
- Large black anodized 3” voice coil and double stack motor system provides high power handling and low distortion
- Carefully optimized motor system design to reduce heat and improve efficiency
- Powerful 650Watt DSP Controlled amplifier (D2 Audio™*)
- Advanced full bridge switch mode power supply (SMPSU) Capable of delivering over 1200 watt peak power
- 12V trigger - provides switching control from A.V amp or processor
- Rigid, 25mm (1”) thick M.D.F construct
- Heavy radial cabinet bracing with separate amplifier partition
- Front mounted control panel for easy access and viewing
- The LEO™* system provides Automatic Room Mode Correction (ARMC) for easy set up and perfect sound quality
- Remote control with 4 user EQ settings
- Selected real wood veneer or high gloss piano finishes
Item |
Value |
|---|---|
| System Format: | Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment |
| Low Frequency Limit: | 18 Hz |
| Upper Frequency Limit: | 40 - 120 Hz Variable |
| Low Pass Filter Alignment: | Active 4th order 24dB/octave (6/12/18/24 dB user adjustable) |
| Amplifier Power Output | 650 watts Continuous. 1200 watts (peak) |
| Amplifier Classification | D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu) |
| Equalisation | 4 Settings (Off/Music/Movie/Impact) |
| Phase Control | 0-90-180-270 degrees |
| Auto Sensing Input Level Requirements | Line Level > 2mV. Standby after 10 minutes if no signal sensed |
| Digital Volume Level | -60 to +10dB in 1dB increments |
| Drive Unit Complement | 1 x 15” C-CAM® sub-woofer driver featuring triple suspension 3” long throw voice coil |
| 12V Trigger Input | 3.5mm mono jack socket |
| Connections | Stereo RCA in/out LFE in/out 12V Trigger in (3.5mm mono jack) LEO* - 3.5mm Microphone input jack (microphone supplied) |
| Input Impedance | 20 kohms |
| Dimensions (H x W x D) | 431.8 x 419.1 x 419.1 mm (17 x 16 1/2 x 16 1/2 Inches) |
| Grille Depth | 28 mm (1 1/8 Inches) |
| Weight (unpacked) | 35.3 kg (77.6 lbs) |
| Mains Input Voltage | 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset) |
| Electrical Certifications | CE/CB/ETL/Fcc/ErP (Energy saving compliant) |
| Power Consumption | Maximum 1000W. Standby < 0.5W (ErP Compliance) |
| Fuse Type | 20mm UL/VDE (Value is region specific) |
| IR Remote Control Code | NEC SH6122 |
Please note that shipping can take a few weeks, but we aspire to have it on your doorstep as soon as possible for you to enjoy.
Share this item: